manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 67

02

65

Access

Selective unlocking of the boot

F

  Press the central button on the 

remote control to unlock the 
boot. The doors remain locked.

If selective unlocking of the boot is deactivated, 
pressing this button also unlocks the doors.

Don't forget to lock the boot again by 
pressing the closed padlock button.

The complete or selective boot 
unlocking parameter is set via the 
vehicle configuration menu.
Selective unlocking of the boot is 
activated by default.

Locking the vehicle

Normal locking using the remote 

control

Normal locking using the key

F

  Turn the key towards the rear in the driver's 

door lock to lock the vehicle.

F

  Press the closed padlock to lock 

the vehicle.

If one of the doors or the boot is still 
open, the central locking does not take 
place.
However, the alarm (if present) will 
be completely activated after about 
45 seconds.
If the vehicle is unlocked inadvertently 
and with no action on the doors or 
boot, the vehicle will lock itself again 
automatically after about 30 seconds.
If the alarm had previously been 
activated, it will not be reactivated 
automatically.

The folding and unfolding of the door 
mirrors using the remote control can be 
deactivated by a CITROËN dealer or a 
qualified workshop.

The direction indicators flash for a 
few seconds.
Depending on version, the door mirrors fold, 
the alarm is activated.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands