manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 159

05

157

Safety

Seat belts

Front seat belts

The front seat belts are fitted with a 
pretensioning and force limiting system.
This system improves safety in the front 
seats in the event of a front or side impact. 
Depending on the severity of the impact, the 
pretensioning system instantly tightens the seat 
belts against the body of the occupants.
The pretensioning seat belts are active when 
the ignition is on.
The force limiter reduces the pressure of the 

seat belt on the chest of the occupant,  

so improving their protection.

Fastening

F

  Pull the strap, then insert the tongue in the 

buckle.

F

  Check that the seat belt is fastened 

correctly by pulling the strap.

Unfastening

F

  Press the red button on the buckle.

F

  Guide the seat belt as it reels in.

Seat belt not fastened / unfastened 

warning lamp in the instrument panel

When the ignition is switched on, this 
warning lamp comes on in the instrument 
panel if the driver and/or the front 
passenger has not fastened their seat belt.

F

  To lower the attachment point, squeeze the 

control 

A

 and slide it downwards.

F

  To raise the attachment point, slide the 

control 

A

 upwards.

From approximately 12 mph (20 km/h) 
this warning lamp flashes for two minutes 
accompanied by an audible signal of increasing 
volume. Once these two minutes have elapsed, 
this warning lamp remains on until the driver 
and/or the front passenger fastens their seat 
belt.

Height adjustment

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands