manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 39

01

37

Instruments

The engine start prevention system 
required by regulations is activated 
automatically once the AdBlue

®

 tank 

is empty.

AdBlue

®

 fluid range indicators

Once the AdBlue

®

 tank is on reserve or after 

detection of a fault with the SCR emissions 
control system, when the ignition is switched 
on an indicator displays an estimate of the 
distance that can be covered, the range, before 
engine starting is prevented.
In the event of simultaneous system fault and 
low AdBlue

®

 level, the shortest range figure is 

the one displayed.

In the event of the risk of non-starting related to a lack of AdBlue

®

Range greater than 1 500 miles (2 400 km)

When the ignition is switched on, no 
information on range is displayed automatically 
in the instrument panel.

With the type 2 instrument panel, 
pressing this button temporarily 
displays the driving range.

Above 3 000 miles (5 000 km), the value is not 
specified.

Type 1 instrument panel

Remaining range between 350 and 1 500 miles (600 and 2 400 km)

When switching on the ignition, the UREA 
warning lamp comes on, accompanied by an 
audible signal and the temporary display in 
the instrument panel of "NO START IN" and 
a distance, indicating the remaining range 
expressed in miles or kilometres before 
engine starting is prevented (e.g. "NO START 
IN 900 miles" means that starting will be 
prevented in 900 miles).
When driving, the message is displayed every 
190 miles (300 km) until the AdBlue tank has 
been topped up.
The reserve level has been reached; it is 
recommended that the tank be topped up as 
soon as possible.
It is recommended that no more than 10 litres 
of AdBlue

®

 are added.

For more information on 

AdBlue

®

 

and the SCR 

system

, and in particular on topping up, refer 

to the corresponding section.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands