DS Automobiles DS 4 Handbook Download Page 288

Page: 288 / 421

286

In the event of a breakdown

Changing the light guides /

sidelamps

Number plate lamps (W5W)

For the replacement of this type of light emitting
diode lamp, contact a CITROËN dealer or a
qualified workshop.

For the replacement of this type of light-
emitting diode lamp, contact a CITROËN dealer
or a qualified workshop.

Insert a thin screwdriver into the lens

cutout.

Push it outwards.

Remove the lens.

Change the faulty bulb.

To refit, press on the lens to clip it in place.

Third brake lamp (LEDs)

To facilitate the removal of the lamp, carry out
this operation with the tailgate half open.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands