DS Automobiles DS 4 Handbook Download Page 168

Page: 168 / 421

166

Safety

General points relating to child seats

Although one of CITROËN's main criteria when designing your vehicle, the safety of your children
also depends on you.

CITROËN recommends

that children

should travel on the

rear seats

of your

vehicle:

rearward

facing

up to the age of 3,

forward

facing

over the age of 3.

For maximum safety, please observe the
following recommendations:
- in accordance with European regulations,

all children under the age of 12 or less
than one and a half metres tall must
travel in approved child seats suited to
their weight

, on seats fitted with a seat

belt or ISOFIX mountings*,

statistically, the safest seats in your
vehicle for carrying children are the
rear seats,

a child weighing less than 9 kg must
travel in the rearward facing position
both in the front and in the rear.

* The regulations on carrying children are

specific to each country. Refer to the
legislation in force in your country.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands