manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 251

07

249

Practical information

Additive level 

 

(Diesel with particle filter)

Topping up

The reservoir must be topped up without delay 
by a CITROËN dealer or a qualified workshop.

Used products

Avoid prolonged contact of used oil or 
fluids with the skin.
Most of these fluids are harmful to 
health or indeed very corrosive.

Do not discard used oil or fluids into 
sewers or onto the ground.
Take used oil to a CITROËN dealer or 
a qualified workshop (France) or to an 
authorised waste disposal site.

According to your version of instrument panel, 
the additive reservoir low level is indicated by:

-  fixed illumination of the particle 

filter warning lamp, accompanied 
by an audible signal and a 
message that the particle filter 
additive level is too low,

or

-  fixed illumination of the service 

warning lamp, accompanied by 
an audible signal and a message 
that the particle filter additive 
level is too low.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands