manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 383

381

Audio and Telematics

A long press on 

LIST

 builds or 

updates the list of stations; audio 
reception is cut momentarily.

Select the desired radio station and 
confirm by pressing 

OK

.

A press changes to the next or 
previous letter (e.g. A, B, D, F, G, 

 

J, K, ...).

Press 

BAND

 to select a waveband.

Press 

LIST

 to display the list of 

stations received in alphabetical 
order.

Press 

SOURCE

 or 

SRC

 several 

times in succession and select radio.

Radio

The exterior environment (hills, buildings, 
tunnel, car park, below ground...) may 

prevent reception, even in RDS station 

tracking mode. This phenomenon is 
normal in the propagation of radio waves 
and is in no way indicative of a fault with 
the audio system.

Selecting a station

Select "

RDS

" and confirm to save.

"

RDS

" is displayed in the screen.

When the radio is displayed on the 

screen, press 

OK

 to display the 

contextual menu.

RDS, if displayed, enables you to continue 
listening to the same station by automatic 
retuning to alternative frequencies. 
However, in certain conditions, coverage 
of an RDS station may not be assured 
throughout the country as radio stations 
do not cover 100 % of the territory. This 
explains the loss of reception of the 
station during a journey.

RDS

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands