manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 281

08

279

In the event of a breakdown

Changing a bulb

The headlamps have polycarbonate 
lenses with a protective coating:

F

 

do not clean them using a dry 
or abrasive cloth, nor with a 
detergent or solvent product,

F

  use a sponge and soapy water or a 

pH neutral product,

F

  when using a high pressure 

washer on persistent marks, do not 
keep the lance directed towards 
the lamps or their edges for too 
long, so as not to damage their 
protective coating and seals.

Changing a bulb should only be done 
after the headlamp has been switched 
off for several minutes (risk of serious 
burns).

F

  Do not touch the bulb directly with 

your fingers, use a lint-free cloth.

It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid 
damaging the headlamp.
Always replace a failed bulb with a 
new bulb with the same type and 
specification.

Light-emitting diodes (LED)

For the replacement of this type of 
lamp, go to a CITROËN dealer or a 
qualified workshop.
LED (light-emitting diode) replacement 
kits are available from CITROËN 
dealers.

Risk of electrocution

Xenon bulbs (D1S) must be replaced 
by a CITROËN dealer or a qualified 
workshop.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands