manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 152

05

150

Safety

Localised Emergency Call

In an emergency, press this 
button for more than 2 seconds.
Flashing of the green indicator 
lamp and a voice message 
confirm that the call has 
been made to the "Localised 
Emergency Call"* centre.

Pressing this button again immediately cancels 
the call.
The green indicator lamp goes off.

The green indicator lamp remains on (without 
flashing) when communication is established.
It goes off at the end of the call.

Localised Emergency Call immediately locates 
your vehicle, makes contact with you in your 
language** and - if necessary - organises 
sending of the appropriate emergency 
services**. In countries where the service is not 
operational, or if the locating service has been 
expressly declined, the call is directed straight 
to the emergency services (112) without 
location.

*  Depending on the terms and conditions for 

the service, available from dealers, and 
technological and technical limits.

If you benefit from the DS Connect 
BOX offer with the SOS and assistance 
pack included, you have available 
additional services in your personal 
space, via the website in your country.

Emergency or assistance call

**  Depending on the geographic cover for 

"Localised Emergency Call", "Localised 
Assistance Call" and the official national 
language selected by the owner of the 
vehicle.

The list of countries covered by Telematic 
services is available at dealers or on the 
website in your country.

If an impact is detected by the airbag 
control unit, and independently of 
the deployment of any airbags, an 
emergency call is made automatically.

Type 1

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands