DS Automobiles DS 4 Handbook Download Page 125

Page: 125 / 421

123

Ease of use and comfort

This is a removable lamp, fitted in the boot
wall, which can be used to light the boot or as
a torch.
For more information on the

Boot lamp

, refer

to the corresponding section.

Torch

This torch operates with NiMH type
rechargeable batteries.
It has a battery life of approximately 45 minutes
and charges while you are driving.

Observe the polarities when fitting the
rechargeable batteries.
Never replace the rechargeable batteries
with normal disposable batteries.

Storing

Put the torch back in place in its location

starting with the lower part.

If you have forgotten to switch off the torch,
this switches it off automatically.

If the torch is not engaged correctly, it
may not charge and may not come on
when the boot is opened.

Use

Extract the torch from its location pulling it

upwards.

Press the switch, located on the back, to

switch the torch on or off.

Unfold the support, located on the back, to

set down and raise the torch; for example,
when changing a wheel.

Operation

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands