manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 269

08

267

In the event of a breakdown

Type 2

1.

  12 V compressor, with integral pressure 

gauge.

2.

  Sealant cartridge, with integral hose.

3.

  Speed limit sticker.

Composition of the kit

The speed limit sticker must be secured 

to the interior of the vehicle in the 

driver's field of vision, to remind you 
that a wheel is in temporary use.

Do not exceed a speed of 50 mph 
(80 km/h) when driving with a tyre 
repaired using this type of kit.

Repair procedure

F

  Switch off the ignition.

F

  Secure the speed limit sticker inside the 

vehicle.

Avoid removing any foreign bodies 
which have penetrated into the tyre.

F

  Uncoil the pipe stowed under the 

compressor.

F

  Connect the pipe from the compressor to 

the sealant cartridge.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands