manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 118

03

116

Ease of use and comfort

Front armrest

Comfort and storage system for the driver and front passenger.
The height and length of the armrest cover can be adjusted.

Height adjustment

Longitudinal adjustment

Storage

There is a storage space below the cover of 
the armrest. Depending on equipment, this can 
contain a 230 V / 50 Hz socket and the back-up 
reader for the electronic key of the Keyless 
Entry and Starting system.

F

  Raise the lever.

F

  Raise the cover fully.

F

  Slide the cover fully forwards or rearwards.

F

  Raise the cover to the required position 

(low, intermediate or high).

F

  If you raise the cover slightly beyond the 

high position, guide it when lowering it to 
the low position.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands