manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 230

07

228

Practical information

If you have put in the wrong fuel for 
your vehicle, you must have the tank 
drained and refilled with the correct 
fuel before you start the engine.

Fuel supply cut-off

Your vehicle is equipped with a safety device 

which cuts off the fuel supply in the event of a 

collision.

F

  Introduce the nozzle so as to push in the 

metal non-return flap

.

F

  Make sure that the nozzle is pushed in as 

far as possible before starting to refuel (risk 
of blowback).

F

  Maintain this position while refuelling.

F

  Push the fuel flap to close it.

If you are filling your tank to the top, do not 
persist after the third cut-off; this could 
cause your vehicle to malfunction.

The petrol or Diesel engine of your vehicle is 
fitted with a catalytic converter, a device which 
helps to reduce the level of harmful emissions 
in the exhaust gases.

For petrol engines, the use of unleaded fuel 
is compulsory.

The filler neck is narrower, admitting unleaded 
petrol nozzles only.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands