manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 167

05

165

Safety

Advice

Front airbags

Do not drive holding the steering wheel by its 
spokes or resting your hands on the centre 
part of the wheel.
Passengers must not place their feet on the 
dashboard.
Do not smoke as deployment of the airbags 
can cause burns or the risk of injury from a 
cigarette or pipe.
Never remove or pierce the steering wheel or 
hit it violently.
Do not fit or attach anything to the steering 
wheel or dashboard, this could cause injuries 
with deployment of the airbags.

Lateral airbags

Use only approved covers on the seats, 
compatible with the deployment the lateral 
airbags. For information on the range of 

seat covers suitable for your vehicle, you 

can contact a CITROËN dealer.
Do not fix or attach anything to the seat 
backs (clothing...). This could cause injury 
to the chest or arms if the lateral airbag is 
deployed.
Do not sit with the upper part of the body 
any nearer to the door than necessary.

Sit in a normal upright position.
Wear a correctly adjusted seat belt.
Do not leave anything between the occupants 
and the airbags (a child, pet, object...), nor 
fix or attach anything close to the inflation 
trajectory of the airbags; this could cause 
injuries during their deployment.
Never modify the original definition of your 
vehicle, particularly in the area directly 
around the airbags.
After an accident or if the vehicle has been 
stolen or broken into, have the airbag 
systems checked.
All work on the airbag system must be 
carried out by a CITROËN dealer or a 
qualified workshop.
Even if all of the precautions mentioned 
are observed, a risk of injury or of minor 
burns to the head, chest or arms when an 
airbag is deployed cannot be ruled out. The 
bag inflates almost instantly (within a few 
milliseconds) then deflates within the same 
time discharging the hot gas via openings 
provided for this purpose.

Curtain airbags

Do not fix or attach anything to the roof. 
This could cause injury to the head if the 
curtain airbag is deployed.
If fitted on your vehicle, do not remove the 
grab handles installed on the roof, they play 
a part in securing the curtain airbags.

For the airbags to be fully effective, observe the safety recommendations below:

The vehicle's front door panels include side 
impact sensors.
A damaged door or any unauthorised or 
incorrectly executed work (modification or 
repair) on the front doors or their interior 
trim could compromise the operation of 
these sensors - Risk of malfunction of the 
lateral airbags!
Such work must only be done by a 
CITROËN dealer or a qualified workshop.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands