manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 273

08

271

In the event of a breakdown

Spare wheel

Procedure for changing a wheel with a damaged or punctured tyre for the spare wheel, using the tools supplied with the vehicle.

The tools are installed in the boot under the 
floor.
To gain access to them:

F

  open the boot,

F

  raise the floor,

F

  secure it by hooking its cord on the hook 

on the rear shelf support,

F

  with a standard size spare wheel, unclip 

and remove the box in the middle of the 
wheel containing the tools,

 or

F

  with a "space-saver" spare wheel; lift the 

wheel at the rear towards you for access to 
the storage box containing the tools.

Access to the tools

1.

  Wheelbrace.

 

For removing the wheel trim and the wheel 
fixing bolts.

2.

  Jack with integral handle.

 

For raising the vehicle.

3.

  Bolt cover removal tool.

 

For removing the bolt head protectors on 
alloy wheels.

4.

  Socket for the security bolts (located in the 

glove box).

 

For adapting the wheelbrace to the special 
"security" bolts.

All of these tools are specific to your 
vehicle and can vary according to 
equipment.
Do not use them for any other 
purposes.

The jack must only be used to change 
a wheel with a damaged or punctured 
tyre.
Do not use any jack other than the one 
supplied with this vehicle.
If the vehicle does not have its original 
jack, contact a CITROËN dealer or a 
qualified workshop to obtain the correct 
jack for it.
The jack meets European standards, 
as defined in the Machinery Directive 
2006/42/CE.
The jack does not require any 
maintenance.

List of tools

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands