manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 182

05

180

Safety

Manual child lock

Mechanical system to prevent opening of the rear door using its interior control.
The control, red in colour, is located on the edge of each rear door. It is identified by a symbol 
marked on the bodywork.

Locking

F

  Using the ignition key or the integral key, 

depending on version, turn the red control 
as far as it will go:
-  to the left on the left-hand rear door,
-  to the right on the right-hand rear door.

Unlocking

F

  Using the ignition key or the integral key, 

depending on version, turn the red control 
as far as it will go:
-  to the right on the left-hand rear door,
-  to the left on the right-hand rear door.

Do not confuse the child lock control, 
which is red, with the back-up locking 
control, which is black.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands