manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 173

05

171

Safety

Child seat at the rear

Rearward facing

When a rearward facing child seat is installed 

on a rear passenger seat

, move the vehicle's 

front seat forward and straighten the backrest 
so that the rearward facing child seat does not 
touch the vehicle's front seat.

Forward facing

When a forward facing child seat is installed 

on a rear passenger seat

, move the vehicle's 

front seat forward and straighten the backrest 
so that the legs of the child in the forward 
facing child seat do not touch the vehicle's front 
seat.

Centre rear seat

A child seat with a support leg must never be 
installed on the 

centre rear passenger seat

.

The incorrect installation of a child seat 
in a vehicle compromises the protection 
of the child in the event of an accident.

Ensure that the seat belt is correctly 
tensioned.
For child seats with a support leg, 
ensure that this is in firm contact with 
the floor. If necessary, adjust the front 
seat of the vehicle.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands