manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 141

04

139

Lighting and visibility

Windscreen and headlamp wash

F

  Pull the windscreen wiper stalk towards 

you. The windscreen wash then the 
windscreen wipers operate for a fixed 
period.

It operates only when the headlamps are off or 
the vehicle is stationary.

Low screenwash / headlamp wash 

fluid level

On vehicle fitted with headlamp washers, the 
low level of this fluid is indicated by gauge in 
the reservoir filler neck under the bonnet.
Checking and topping up this fluid can should 
be done with the engine off.

The level of this fluid should be 
checked regularly, particularly during 
winter.

For more information on 

Checking the levels

 

and in particular the screenwash / headlamp 
wash, refer to the corresponding section.

Associated with the windscreen wash, the 
headlamp washers operate with the vehicle 
moving, when 

the dipped or main beam 

headlamps are on

.

To reduce the consumption of the fluid 
by the headlamp washers, they operate 

only with every seventh use of the 

screenwash or every 25 miles (40 km) 
during a given journey.

Windscreen wash

Headlamp wash

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands