manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 213

06

211

Driving

No alert will be given in the following situations:
-  in the presence of immobile objects 

(parked vehicles, barriers, street lamps, 
road signs...),

-  with vehicles moving in the opposite 

direction,

-  driving on a sinuous road or a sharp 

corner,

The alert is given by a warning lamp which 
comes on in the door mirror on the side in 

question as soon as a vehicle - car, lorry, 

cycle - is detected.
For this, the following conditions must be met:
-  all the vehicles must be moving in the 

same direction,

-  the speed of your vehicle is between 7 and 

75 mph (12 and 140 km/h),

-  when you overtake a vehicle with a speed 

difference of less than 6 mph (10 km/h),

-  when a vehicle overtakes you with a speed 

difference of less than 15 mph (25 km/h),

-  the traffic must be flowing normally,
-  in the case of an overtaking manoeuvre, 

if this is prolonged and the vehicle being 
overtaken remains in the blind spot,

-  you are driving on a straight or slightly 

curved road,

-  your vehicle is not pulling a trailer, 

a caravan...

-  when overtaking (or being overtaken by) a 

very long vehicle (lorry, coach...) which is 
at the same time detected at the rear in the 
blind spot angle and present in the driver's 
forward field of vision,

-  in very heavy traffic: vehicles detected in 

front and behind are confused with a lorry 
or a stationary object,

-  when overtaking quickly.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands