manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 22

01

20

Instruments

Braking

fixed, associated with 
the STOP warning 
lamp.

The braking system fluid level has 
dropped significantly.

You must stop as soon as it is safe to do so.
Top up with brake fluid recommended by CITROËN.
If the problem persists, have the system checked by a 
CITROËN dealer or a qualified workshop.

+

fixed, associated with 

the electric parking 

brake malfunction 

warning lamp, if the 

parking brake is 

released.

The braking system has a fault.

You must stop as soon as it is safe to do so.
Park, switch off the ignition and contact a CITROËN 
dealer or a qualified workshop.

+

fixed, associated with 
the STOP and ABS 
warning lamps.

The electronic brake force distribution 
(EBFD) system has a fault.

You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified 
workshop.

Warning/indicator

 

lamp

is on

Cause

Action/Observations

Electric parking 
brake fault

fixed.

The electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop 

without delay.
For more information on the 

Electric parking brake

, 

refer to the corresponding section.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands