manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 29

01

27

Instruments

Warning/indicator

 

lamp

is on

Cause

Action/Observations

Left-hand 
direction indicator

flashing with buzzer.

The lighting stalk has been 
pushed down.

Right-hand 
direction indicator

flashing with buzzer.

The lighting stalk has been pushed up.

Front foglamps

fixed.

The front foglamps are switched on 
using the ring on the lighting control 
stalk.

Turn the ring on the lighting control stalk rearward 
twice to switch off the front foglamps.

Rear foglamps

fixed.

The rear foglamps have been 
switched on using the ring on the 
lighting control stalk.

Turn the ring on the lighting control stalk rearwards to 
switch off the rear foglamps.

Hazard warning 
lamps

flashing with audible 
signal.

The hazard warning lamps switch, 
located on the dashboard, has been 
operated.

The left-hand and right-hand direction indicators and 
their associated indicator lamps flash simultaneously.

Stop & Start

fixed.

When the vehicle stops (red lights, 
traffic jams, ...) the Stop & Start system 
has put the engine into STOP mode.

The warning lamp goes off and the engine restarts 
automatically in START mode, as soon as you want to 
move off.

flashes for a few 

seconds, then goes 
off.

STOP mode is temporarily 

unavailable,
or

START mode is invoked 
automatically.

For more information on 

Stop & Start

, refer to the 

corresponding section.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands