DS Automobiles DS 4, Handbook

Page: 278 / 421

08
276
In the event of a breakdown
F
Place the foot of the jack
2
on the ground
and ensure that it is directly below the
front A or rear B
jacking point provided on
the underbody, whichever is closest to the
wheel to be changed.
F
Remove the bolts and store them in a clean
place.
F
Remove the wheel.
Ensure that the jack is stable. If the ground is slippery or loose, the jack may slip or drop - Risk of injury!
Take care to position the jack only at one of the jacking points
A or B
under the vehicle, ensuring that the head of the jack is centred under the
contact area of the vehicle. Otherwise, there is a risk of damage to the vehicle and/or the jack dropping - Risk of injury!
F
Extend the jack
2
until its head comes into
contact with the jacking point
A or B
used;
the contact area A or B
on the vehicle must
be engaged with the central part of the
head of the jack.
F
Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.