DS Automobiles DS 4 Handbook Download Page 80

Page: 80 / 421

Access

Press this button to lock the vehicle.

The red indicator lamp in the button comes on.

Central locking control

This control allows the simultaneous locking or unlocking of the doors and boot from inside the
vehicle.

If one of the doors is open, central
locking from the inside does not take
place.

When locking / deadlocking

from the outside

When the vehicle is locked or
deadlocked from the outside, the red
warning lamp flashes and the button is
inoperative.

With normal locking, pull the

interior door control lever to unlock
the vehicle.

With deadlocking, you have to use

the remote control or the key to
unlock the vehicle.

Unlocking

Locking

Press the button again to unlock the

vehicle.

The red indicator lamp in the button goes off.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands