manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 357

355

Audio and Telematics

As a safety measure and because it 
requires sustained attention by the 
driver, using a smartphone when 
driving is prohibited.
All operations must be done with the 

vehicle stationary

.

The synchronisation of a 
smartphone allows applications on a 
smartphone that are adapted to the 
MirrorLink

TM

 technology to be displayed 

in the vehicle's screen.
The principles and standards 
are constantly evolving. For the 
communication process between the 
smartphone and the system to work 
correctly, the smartphone must be 
unlocked; update the operating system 
of your smartphone as well as the date 
and time in the smartphone and the 
system.
For the list of eligible smartphones, 
connect to the brand's internet website 
in your country.

Please note:
-  if your smartphone is supported, to 

make it "MirrorLink

TM

" compatible, 

some phone manufacturers 

nevertheless invite you to first 

download a dedicated application.

When connecting a smartphone to 
the system, it is recommended that 
Bluetooth

®

 be started on the smartphone.

Start the application on the 

smartphone (optional, depending 
on the smartphone and operating 
system).

Access to the different audio sources remains 
accessible in the margin of the MirrorLink

TM

 

display, using touch buttons in the upper bar.
Access to the menus for the system is possible 
at any time using the dedicated buttons.

During the procedure, several screen 
pages relating to certain functions 
are displayed.
Accept to start and end the 
connection.

Connect a USB cable. The 
smartphone charges when 
connected by a USB cable.

Press on "

MirrorLink

TM

" to 

start the application in the 

system.

Once connection is established, an page 
is displayed with the applications already 
downloaded to your smartphone and adapted 
to MirrorLink

TM

 technology.

If only one application has been downloaded to 
the smartphone, it starts automatically.

MirrorLink

TM

 smartphone connection

Press the end of the lighting control stalk to 
start voice recognition of your smartphone via 
the system.
Voice recognition requires a compatible 
smartphone connected to the vehicle by 
Bluetooth

®

.

Voice recognition

As a safety measure, applications 
can only be viewed with the vehicle 
stationary; display is interrupted once 
the vehicle is moving.

From the system, press on 

"

Connected services

" to display the 

primary page.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands