manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 158

05

156

Safety

In extremely severe conditions (deep snow, 
mud, ...), if you are unable to move off, it may 
be useful to temporarily deactivate these 
systems so that the wheels can spin freely and 
allow the vehicle to move.

If the indicator lamp in the button comes on, this 
indicates that these systems are deactivated.

Reactivation

These systems are reactivated automatically 
each time the ignition is switched back on or 
from 30 mph (50 km/h).

F

  Press this button again to reactivate them 

manually.

Operating fault

The trajectory control systems offer 
increased safety in normal driving, but 
this should not encourage the driver to 
take extra risks or drive at high speed.
The correct functioning of these 
systems is assured provided that 
manufacturer's recommendations are 
observed on:
-  wheels (tyres and rims),
-  braking components,
-  electronic components,
-  assembly and repair procedures.
After an impact, have these systems 
checked by a CITROËN dealer or a 
qualified workshop.

The illumination of the indicator 
lamps in the instrument panel and 
in this button, accompanied by an 
audible signal and a message in the 
screen, indicates a fault with these 
systems.

It is recommended that the systems be 
reactivated as soon as possible.

Have it checked by a CITROËN dealer or a 
qualified workshop.

Deactivation

F

  Press this button, located near the steering 

wheel.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands