manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 240

07

238

Practical information

Towing a trailer

We recommend the use of genuine 
CITROËN towbars and their harnesses 
that have been tested and approved 
from the design stage of your vehicle, 
and that the fitting of the towbar is 
entrusted to a CITROËN dealer or a 
qualified workshop.
If the towbar is not fitted by a 
CITROËN dealer, it must still be 
fitted in accordance with the vehicle 
manufacturer's instructions.

Your vehicle is primarily designed for 
transporting people and luggage, but it may 
also be used for towing a trailer.

Driving with a trailer places greater 
demands on the towing vehicle and the 
driver must take particular care.
For more information on 

Driving 

advice

, particularly when towing, refer 

to the corresponding section.

For more information on 

Weights

 (and 

the towed loads which apply to your 
vehicle) refer to the corresponding 
section.

You must observe the maximum trailer 
weight, indicated on the registration 

certificate or in the technical 

specification for your vehicle.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands