manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 24

01

22

Instruments

Warning/indicator

 

lamp

is on

Cause

Action/Observations

Anti-lock Braking 
System (ABS)

fixed.

The anti-lock braking system has 

 

a fault.

The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a 
CITROËN dealer or a qualified workshop without delay.

Dynamic stability 
control  
(DSC/ASR)

flashing.

Regulation by the system is active.

The system optimises traction and improves the 
directional stability of the vehicle.

fixed, associated with 

illumination of the 

indicator lamp in the 

deactivation button, 

accompanied by an 

audible signal and a 

message.

The DSC/ASR or hill start assist 

system has a fault.

Have it checked by a CITROËN dealer or a qualified 

workshop.

Low fuel level

fixed, accompanied by 
and audible signal and 
a message.

When it first comes on there remains 
approximately 

6

 

litres

 of fuel in the 

tank.
At this point, you begin to use the fuel 
reserve.

Refuel as soon as possible to avoid running out of 
fuel.
Until sufficient fuel is added, this warning lamp will 
come on every time the ignition is switched on, 
accompanied by an audible signal and a message. 
This audible signal and message are repeated 
with increasing frequency as the fuel level drops 
towards 

"0"

.

Fuel tank capacity: approximately 

60 litres

.

Never continue to drive until you run out of fuel,

 

as this could damage the emission control and 
injection systems.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands