manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 83

02

81

Access

Boot

The vehicle or just the boot is unlocked, 
depending on the setting.

Selective unlocking

By default, complete unlocking is activated.
This setting is done in the 

"Driving"

 menu, 

then 

"Vehicle settings"

 and 

"Vehicle 

access"

.

When unlocking of the boot only is activated:

F

  With the electronic key on your person and 

in the recognition zone 

A

, press the boot 

unlocking control to unlock just the boot, 
then raise the tailgate.

Use this button for access to 
additional information.

F

  Lower the tailgate using one of the interior 

grab handles.

Closing

Opening

F

  After unlocking the vehicle or the boot with 

the Keyless Entry and Starting system 
electronic key on your person in the 
recognition zone 

A

, press the boot opening 

control then raise the tailgate.

If the boot is not closed correctly:

-  with the engine running or the 

vehicle moving (speed below 
6 mph (10 km/h)), this warning 
lamp comes on, accompanied by 
the display of an alert message 
for a few seconds.

-  with the vehicle moving (speed above 

6 mph (10 km/h)), in addition to the warning 
lamp and alert message, there is an an 
audible signal for a few seconds.

Unlocking is signalled by rapid flashing of the 
direction indicators for a few seconds.

Complete unlocking

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands