manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 27

01

25

Instruments

Warning/indicator

 

lamp

is on

Cause

Action/Observations

+

+

SCR emissions 
control system

 

(BlueHDi Diesel)

fixed, on switching on 
the ignition, associated 
with the SERVICE and 
engine diagnostic warning 
lamps, accompanied by 
an audible signal and a 
message.

A fault with the SCR emissions 
control system has been detected.

This alert disappears once the exhaust emissions 
return to normal levels.

flashing, on switching on 
the ignition, associated 
with the SERVICE and 
engine diagnostic warning 
lamps, accompanied by 
an audible signal and a 
message indicating the 
remaining driving range.

After confirmation of the fault with the 
emissions control system, you can 
drive for up to 650 miles (1 100 km) 
before the engine starting inhibition 
system is triggered.

Contact a CITROËN dealer or a qualified 
workshop 

without delay

, 

to avoid a breakdown

.

flashing, on switching on 
the ignition, associated 
with the SERVICE and 
engine diagnostic warning 
lamps, accompanied by 
an audible signal and a 
message.

You have exceeded the authorised 
driving limit following confirmation 
of a fault with the emissions control 
system: the engine starting inhibition 
system prevents starting of the 
engine.

To be able to start the engine, you 

must

 call on a 

CITROËN dealer or a qualified workshop.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands