DS Automobiles DS 4 Handbook Download Page 199

Page: 199 / 421

197

Driving

6-speed manual gearbox

Raise the ring under the knob and move

the gear lever to the left then forwards.

Engaging reverse gear

As a safety precaution and to facilitate
starting of the engine:

always select neutral,

- press the clutch pedal.

Only engage reverse gear when the
vehicle is stationary with the engine at idle.

Engaging 5

or 6

gear

Move the lever fully to the right to

engage 5

or 6

gear.

Failure to observe this procedure
may cause permanent damage to the
gearbox (engaging 3

or 4

gear by

mistake).

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands