manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 68

02

66

Access

F

  Press the closed padlock to lock 

the vehicle completely.

Deadlocking using the remote 

control

F

  Press the closed padlock again 

within five seconds to deadlock 
the vehicle.

F

  Turn the key to the rear in the driver's door 

lock to lock the vehicle completely.

F

  Turn the key to the rear again within five 

seconds to deadlock the vehicle.

Deadlocking using the key

Deadlocking is confirmed by fixed lighting 
of the direction indicators for approximately 
two seconds.
According to version, the door mirrors fold at 
the same time.
In low light, deadlocking also brings on the 
guide-me-home lighting.
For more information on the guide-me-home 
lighting, refer to the corresponding section.

Deadlocking renders the exterior and 
interior door controls inoperative.
It also deactivates the central locking 
control button.
Therefore, never leave anyone inside 
the vehicle when it is deadlocked.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands