DS Automobiles DS 4 Handbook Download Page 193

Page: 193 / 421

191

Driving

Emergency switch-off

In the event of an emergency only,
the engine can be switched of without
conditions. To do this, press and hold

the "

START/STOP

" button for about

3 seconds.

In this case the steering column locks as soon
as the vehicle stops.

Electronic key not recognised

If the electronic key is no longer in the
recognition zone when driving or when you
(later) request switching off the engine, a
message is displayed.

Press and hold the "

START/

STOP

" button for about

3 seconds if you want to force
switching off the engine

(note

that restarting will not be
possible without the key)

Ignition on position

(without starting)

With the Keyless Entry and Starting key inside
the vehicle, pressing the "

START/STOP

button,

with no action on the pedals

, allows

the ignition to be switched on.

Press the "

START/STOP

" button,

the instrument panel comes on
but the engine does not start.

Press the button again to switch

off the ignition and so allow the
vehicle to be locked.

With the ignition on, the system
automatically goes into energy
economy mode when required to
maintain the state of charge of the
battery.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands