manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 31

01

29

Instruments

Particle

 

filter 

(Diesel)

fixed, accompanied 
by an audible signal 
message on the risk of 
blockage of the particle 
filter.

This indicates that the particle filter is 
starting to become saturated.

As soon as driving conditions allow, regenerate the 
filter by driving at a speed of at least 35 mph (60 km/h) 
until the warning lamp goes off.

fixed, accompanied by 
an audible signal and 
a message that the 
particle filter additive 
level is too low.

This indicates the low level of the 
additive reservoir.

Have the reservoir topped-up as soon as possible by a 
CITROËN dealer or a qualified workshop.

Warning/indicator

 

lamp

is on

Cause

Action/Observations

Door(s) open

fixed, associated with 
a message identifying 
the door, if the speed is 
below 6 mph (10 km/h).

A door or the boot is still open.

Close the door or boot.

fixed, associated with a 
message identifying the 
door, together with an 
audible signal if the speed 
is above 6 mph (10 km/h).

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands