manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 271

08

269

In the event of a breakdown

If after around 5 to 7 minutes the 
pressure is not attained, this indicates 

that the tyre is not repairable; contact 

a CITROËN dealer or a qualified 
workshop for assistance.

Take care, the sealant product is 
harmful if swallowed and causes 
irritation to the eyes.
Keep this product out of the reach of 
children.
The use-by date is marked on the 
cartridge.
After use, do not discard the 
cartridge by the roadside, take it to 
a CITROËN dealer or an authorised 
waste disposal site.
Don't forget to obtain a new sealant 
cartridge, available from a CITROËN 
dealer or a qualified workshop.

F

  Start the compressor by placing the switch 

at the "

I

" position and leave it running until 

the tyre pressure reaches 2.0 bar.

 

The sealant product is injected into the tyre 
under pressure; do not disconnect the pipe 
from the valve during this operation (risk of 
splashing and stains).

F

  Drive immediately for approximately 

three miles (five kilometres), at reduced 
speed (between 15 and 35 mph (20 and 
60 km/h)), to plug the puncture.

F

  Stop to check the repair and the tyre 

pressure using the kit.

F

  Place the switch in the "

O

" position.

F

  Remove the kit.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands