manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 120

03

118

Ease of use and comfort

230 V / 50 Hz power socket

Connect only one device at a time to 
the socket (no extension or multi-way 
connector).
Connect only devices with class II 
insulation (shown on the device).
As a safety measure, when electrical 
consumption is high and when 
required by the vehicle's electrical 
system (particular weather conditions, 
electrical overload...), the power supply 
to the socket will be cut off; the green 
warning lamp goes off.

A 230 V / 50 Hz socket (maximum power: 
120 W) is fitted to the centre console.
To use the socket:

F

  lift the front armrest cover for access to its 

compartment,

F

  check that the warning lamp is on green,

F

  connect your multimedia or other electrical 

device (telephone charger, laptop 
computer, CD-DVD player, baby food 
warmer...).

This socket works with the engine running, as 
well as in STOP mode on Stop & Start.
In the event of a fault with the socket, the green 
warning lamp flashes.
Have it checked by a CITROËN dealer or a 
qualified workshop.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands