manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 20

01

18

Instruments

Warning/indicator

 

lamp

is on

Cause

Action/Observations

STOP

fixed, alone or 
associated with 
another warning lamp, 
accompanied by an 
audible signal and a 
message in the screen.

Illumination of this warning lamp is 
associated with a serious fault with 
the braking system, power steering, 
engine lubrication system or cooling 
system.

Stop as soon as it is safe to do so as there is a risk that 
the engine will cut out while driving.
Park, switch off the ignition and contact a CITROËN 
dealer or a qualified workshop.

Maximum coolant 
temperature

fixed.

The temperature of the cooling system 
is too high.

Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping-
up the level, if necessary.
If the problem persists, contact a CITROËN dealer or 
qualified workshop.

Engine oil 
pressure

fixed.

There is a fault with the engine 
lubrication system.

You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a CITROËN 
dealer or a qualified workshop.

* Depending on country of sale.

Seat belt not 
fastened / 
unfastened*

fixed, then flashing, 
accompanied by an 
increasing audible 
signal.

The driver or front passenger has not 
buckled or has unbuckled their seat 
belt.

Pull on the belt in question and insert the tongue in the 
buckle.
This warning repeats the seat belt information given by 
the roof console warning lamps.

At least one rear passenger has 
unbuckled their seat belt.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands