DS Automobiles DS 4 Handbook Download Page 26

Page: 26 / 421

Instruments

Warning/indicator

lamp

is on

Cause

Action/Observations

AdBlue

(BlueHDi Diesel)

fixed, on switching

on the ignition,

accompanied by an

audible signal and a

message indicating

the remaining driving

range.

The remaining driving range is
between 350 miles (600 km) and
1500 miles (2400 km).

Top-up the AdBlue

as soon as possible or go to a

CITROËN dealer or a qualified workshop.

flashing, associated

with the SERVICE

warning lamp,

accompanied by an

audible signal and a

message indicating

the remaining driving

range.

The remaining driving range is
between 0 and 350 miles (600 km).

You must

top-up the

AdBlue

avoid a breakdown

or go to a CITROËN dealer or a qualified workshop.

flashing, associated

with the SERVICE

warning lamp,

accompanied by an

audible signal and a

message indicating

that starting is

prevented.

The AdBlue

tank is empty: the

starting inhibition system required
by legislation prevents starting of the
engine.

To be able to start the engine, you must

top-up

the

AdBlue

or call on a CITROËN dealer or a qualified

workshop.

It is

essential

to add at least 3.8 litres of AdBlue

the fluid tank

For topping-up or for more information on

AdBlue

and the SCR system

, refer to the corresponding section.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands