manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 233

07

231

Practical information

Snow chains

In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.

The snow chains must be fitted only 
to the front wheels. They must never 
be fitted to "space-saver" type spare 
wheels.

For more information on snow chains, contact a 
CITROËN dealer or a qualified workshop.

Advice on installation

F

  If you have to fit the chains during a 

journey, stop the vehicle on a flat surface 
on the side of the road.

F

  Apply the parking brake and position any 

wheel chocks to prevent movement of 
your vehicle.

F

  Fit the chains following the instructions 

provided by the manufacturer.

F

  Move off gently and drive for a few 

moments, without exceeding 30 mph 
(50 km/h).

F

  Stop your vehicle and check that the snow 

chains are correctly tightened.

Avoid driving with snow chains on 
roads that have been cleared of snow, 
to avoid damaging your vehicle's tyres 
and the road surface. If your vehicle 
is fitted with alloy wheels, check that 
no part of the chain or its fixings is in 
contact with the wheel rim.

Take account of the legislation in force 

in your country on the use of snow 

chains and the maximum running 
speed authorised.

Use only the chains designed to be fitted to the 
type of wheel fitted to your vehicle:

Original 

 

tyre size

Maximum 

 

link size.

215/60 R16

9 mm

215/55 R17

225/45 R18
225/40 R19

cannot be fitted with chains

It is strongly recommended that before 
you leave, you practise fitting the snow 
chains on a level and dry surface.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands