manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 69

02

67

Access

F

  Press this button.

Locating your vehicle

This function allows you to identify your vehicle 
from a distance, particularly in poor light. Your 
vehicle must be locked.

Folding the key

Closing the windows using 

 

the remote control

F

  Press and hold the closed 

padlock button until the desired 
position is obtained. The 
windows stop when you release 
the button.

When closing the windows using the 
remote control you must ensure that 
nothing prevents them from closing 
correctly.
If you want to leave the windows 
partly open, you must deactivate the 
volumetric alarm monitoring.

If you do not press the button, there is a 
risk of damaging the remote control.

F

  Press this button before folding the key.

This will switch on the courtesy lamps and 
the direction indicators will flash for around 
ten seconds.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands