manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 23

01

21

Instruments

Service

temporarily, 
accompanied by a 
message.

One or more minor faults for which 
there is no specific warning lamp 
have been detected.

Identify the cause of the fault using the message 
displayed in the screen.
You can deal with some problems yourself, such as a 
door open or the start of saturation of the particle filter 
(as soon as the traffic conditions allow, regenerate 
the filter by driving at a speed of at least 40 mph 
(60 km/h), until the warning lamp goes off).
For any other problems, such as a fault with the tyre 
under inflation detection system, contact a CITROËN 
dealer or a qualified workshop.

fixed, accompanied by 
a message.

One or more major faults for which 
there is no specific warning lamp 
have been detected.

Identify the cause of the fault using the message 
displayed in the screen; you must then contact a 
CITROËN dealer or a qualified workshop.

fixed, associated with the 
flashing and then fixed 
display of the service 
indicator spanner.

The servicing interval has been 
exceeded.

Only on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as possible.

Warning/indicator

 

lamp

is on

Cause

Action/Observations

Engine

 

self-

diagnosis

 

system

flashing.

The engine management system has 
a fault.

Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or a qualified 
workshop.

fixed.

The emission control system has a 
fault.

The warning lamp should go off when the engine is started.
If it does not go off, contact a CITROËN dealer or qualified 
workshop without delay.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands