manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 332

1

1

23

24

25

32

330

Audio and Telematics

Risk areas / Danger zone alert settings

Press on 

Navigation

 to display the 

primary page.

Press on the secondary page.

Select "

Settings

".

Select "

Alarm!

" (Alert).

It is then possible to activate Risk areas alerts 
then:
-  "Audible warning"
-  "Alert only when navigating"
-  "Alert only for overspeed"
-  "Display speed limits"
-  Timing: the choice of timing allows the 

time before giving a Risk areas alert to be 
defined.

Select "

Confirm

".

This series of alerts and displays is 
only available if Risk areas have first 
been downloaded and installed on the 
system.

Traffic

Traffic information

Display of messages

Press on 

Navigation

 to display the 

primary page.

Press on the secondary page.

Select "

Traffic messages

".

Choose filter settings for:

"

On the route

",

"

Around

",

"

Near destination

", filters to fine-

tune the list of messages.

Press again to remove the filter.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands