manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 235

07

233

Practical information

Towbar with quickly detachable towball

For more information on the 

Technical 

data

 and in particular the maximum 

trailer weight and the recommended 
nose weight, refer to the corresponding 
section.
For more information on the 

Driving 

advice

, in particular when towing 

a trailer, refer to the corresponding 
section.

Observe the legislation in force in the 
country in which you are driving.

Presentation

1.

 Carrier

2.

  Protective blanking plug.

3.

  Security ring.

4.

  Folding trailer harness socket.

5.

  Detachable towball.

6.

  Locking / unlocking wheel.

7.

  Security key lock.

8.

  Locking wheel protector.

9.

  Ball protector.

10.

  Storage bag.

The locking wheel is not in contact with the 
towball (gap of about 5 mm).
The green mark is visible.
The lock for the locking wheel is facing 
rearward.

The locking wheel is in contact with the towball.
Then green mark is hidden.
The lock for the locking wheel is facing forward.

This towbar allows the towball to be fitted and 
removed quickly and easily without the use 
of tools. Installed behind the rear bumper, the 
towbar is invisible after removing the towball 
and folding the trailer harness socket carrier.

A. Locked position

B. Unlocked position

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands