DS Automobiles DS 4 Handbook Download Page 272

Page: 272 / 421

270

In the event of a breakdown

Checking / adjusting tyre pressures

You can also use the compressor, without
injecting sealant, to check and if necessary
adjust the tyre pressures

Remove the valve cap from the tyre and

place it in a clean area.

Uncoil the pipe stowed under the

compressor.

Check that the compressor switch is at

the "

" position.

Uncoil fully the electric cable, stowed under

the compressor.

Start the compressor by placing the switch

at the "

" position and adjust the pressure

to the value shown on the vehicle's tyre
pressure label.

To deflate: press the black button on the
compressor pipe, at the valve connector.

Once the correct pressure is reached, put

the switch to the "

" position.

Remove the kit then stow it.

Connect the compressor's plug to the

vehicle's 12 V socket.

Switch on the ignition.

Screw the pipe onto the valve and tighten

firmly.

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands