manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 112

03

110

Ease of use and comfort

Front demist - defrost

These markings on the control panel indicate the control positions for rapid demisting or 
defrosting of the windscreen and side windows.

With manual air conditioning

F

  Put the temperature, air flow and 

distribution controls to the dedicated 
marked position.

F

  Put the air intake control to the "Exterior air 

intake" position 

 

(indicator lamp on the control off).

F

  Switch on the air conditioning by pressing 

the 

"A/C"

 button; the warning lamp in the 

button comes on.

With digital dual-zone air 

conditioning

With Stop & Start, when the demisting, 
air conditioning and air flow functions 
are activated, STOP mode is not 
available.

Automatic visibility programme

F

  Select this programme to demist or defrost 

the windscreen and side windows as 
quickly as possible.

The system automatically manages the air 
conditioning, air flow and air intake, and 
provides optimum distribution towards the 
windscreen and side windows.

F

  To stop the programme, press either the 

"visibility"

 button again or 

"AUTO"

, the 

warning lamp on the button goes off and 
the warning lamp on the 

"AUTO"

 button 

comes on.

The system starts again with the values in 
use before it was overridden by the visibility 
programme.

With Stop & Start, when demisting has 
been activated, the STOP mode is not 
available.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands