DS Automobiles DS 4 Handbook Download Page 197

Page: 197 / 421

195

Driving

With the vehicle stationary, the parking brake

is automatically applied when the engine is
switched off

Automatic application,

engine off

In the case of towing, a loaded vehicle
or parking on a gradient, turn the front
wheels towards the pavement and
engage a gear when you park.

Before leaving the vehicle, ensure
that parking brake warning lamp in the
instrument panel is on fixed

(not flashing).
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.

- illumination of the braking warning

lamp and of the

warning lamp in

the control lever

- display of the message "Parking

brake on".

The application of the parking brake is
confirmed by:

Automatic release

The electric parking brake

releases

automatically and progressively

when you

press the accelerator:

With a manual gearbox: press down fully

on the clutch pedal, engage first gear or
reverse, press on the accelerator pedal
and move off.

With an automatic gearbox: select

position

then press the

accelerator pedal.

When stationary, with the engine running, do
not press the accelerator pedal unnecessarily,
as you may release the parking brake.

Full release of the parking brake is
confirmed by:

- the braking warning lamp and

the

warning lamp in the control

lever

going off,

- display of the message "Parking

brake off".

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands