DS Automobiles DS 4 Handbook Download Page 124

Page: 124 / 421

122

Ease of use and comfort

Boot fittings

To remove the shelf:

unhook the two cords,

raise the shelf slightly, then remove it.

There are several options for storing the shelf:
- either upright behind the front seats,
- or flat at the base of the boot.

Rear parcel shelf

The hooks can be used to secure shopping
bags.

Hooks

To connect a 12 V accessory (max power:

120 W), remove the cap and connect an
appropriate adaptor.

Switch on the ignition.

12 V accessory socket

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands