manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 198

06

196

Driving

With the engine running and the vehicle 
stationary, in order to immobilise the vehicle 

it is essential to 

manually

 apply the parking 

brake by 

pulling

 control lever 

A

.

Immobilising the vehicle, 

engine running

The emergency braking must only be 
used in exceptional circumstances.

Before leaving the vehicle, ensure 
that parking brake warning lamp in the 
instrument panel is on fixed, not flashing.

The application of the parking brake is 
confirmed by:

-  illumination of the braking 

warning lamp and the 

P

 warning 

lamp in the control lever 

A

,

-  display of the message "Parking 

brake on".

When the driver’s door is opened, a message is 
displayed accompanied by an audible signal, if 
the parking brake has not been applied.
With an automatic gearbox, the audible signal 
and the message will not appear if the gear 

selector is at position 

P

.

Particular situations

In certain situations (e.g. starting the engine), 
the parking brake can automatically alter its 
force. This is normal operation.
To advance your vehicle a few centimetres 
without starting the engine, but with the ignition 
on, press on the brake pedal and release the 
parking brake 

by pulling

 then 

releasing

 the 

control lever 

A

. The full release of the parking 

brake is confirmed by the warning lamps in 

the control lever 

A

 and in the instrument panel 

going off and display of the message "Parking 
brake off".

Emergency braking

In the event of failure of the electronic 

stability control system, signalled by 
the illumination of this warning lamp, 
braking stability is then not guaranteed.

In the event of a failure of the main service 
brake or in an exceptional situation (e.g. driver 
taken ill, under instruction, etc) a continuous 

pull on the control lever 

A

 will stop the vehicle.

The electronic stability control provides stability 
during emergency braking.
If the emergency braking malfunctions, 
the message "Parking brake faulty" will be 
displayed.

In this event, stability must be assured by the 
driver by repeating alternate "pull-release" 

actions on the control lever 

A

.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands