manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 176

05

174

Safety

U

:  seating position suitable for the installation 

of a child seat secured using the seat belt 
and universally approved rearward facing 
and/or forward facing.

U(R1)

:  identical to 

U

, with the vehicle's seat 

backrest inclined fully forwards.

U(R2)

:  identical to 

U

, with the vehicle's seat 

adjusted to the highest position.

X

:  seating position not suitable for installing a 

child seat for the weight group indicated.

Remove and stow the head restraint 
before installing a child seat with 
backrest on a passenger seat. Refit the 
head restraint once the child seat has 
been removed.

(a)  Universal child seat: child seat which can be 

installed in all vehicles using the seat belt.

(b)  Group 0: from birth to 10 kg. Infant car seats 

and "car cots" cannot be installed on the 
front passenger seat.

(c)  Consult the legislation in force in your 

country before installing your child on this 
seat.

(d)  To install a child seat at the rear, rearward 

or forward facing, move the front seat 
forward, then straighten the backrest to 
allow enough room for the child seat and the 
child's legs.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands