manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 418

Matt paint

The following recommendations should be 
taken into account in the care and maintenance 
of the matt paint. They also appear in the 
servicing and warranty booklet for the vehicle.
-  Never clean the vehicle without water.
-  Never clean your vehicle in an automatic 

roller-brush car wash.

-  Never polish the body or the alloy wheels. 

This makes the paint bright.

- 

Do not use paint restorers, abrasive or 

polishing products or paint preservers 
(wax polish, for example) on the paintwork. 
These products are only suitable for bright 
finishes. Using them on vehicles finished 
with matt paint seriously damages the 
surface finish of the vehicle, resulting in 

particular in the appearance of irreversible 

bright or stained areas.

-  Never use a high pressure jet washer fitted 

with a brush as this may scratch the paint 
surface.

-  Never select a wash programme with a 

final hot wax cycle.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands