manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 100

03

98

Ease of use and comfort

Rear seats

Bench seat with fixed one-piece cushion and split backrests (1/3 - 2/3) which can be folded individually to adapt the load space in the boot.

F

  Move the corresponding front seat forward 

if necessary.

F

  Position the seat belt between the outer 

and centre head restraints to avoid 
trapping the belt when repositioning the 
seat backrest.

F

  Place the head restraints in the low 

position.

Folding the backrest

F

  Pull control 

1

 forwards to release the seat 

back 

2

.

F

  Straighten the seat back 

2

 and secure it.

F

  Check that the red indicator, located next to 

the control 

1

, is no longer visible.

F

  Put the seat belt back in place on the side 

of the seat backrest.

Repositioning the seat backrest

When repositioning the seat backrest, 
take care not to trap the seat belts.

F

  Fold the seat back 

2

 on to the cushion.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands